Guide for How to Replace Blown In Attic Insulation in Dexter, MI & Signs Yours Needs Replacing

Blown-in insulation is a common material and method used to insulate unfinished attic spaces. As home’s age, or if the insulation has gotten wet or damaged, it will need replacement to properly insulate your attic. When the time comes and you need to replace your insulation, this isn’t a task you should do yourself. It takes a professional to do it right!. Big Ike’s Roofing Company will explain the steps of replacing Blown-in Attic insulation.

Blown In Attic Insulation Replacement Guide

Step 1. Remove the Old Insulation – Most modern homes were built using blown-in insulation that contains cellulose fiber. If the home was built in the 1950’s or older, it most likely contains asbestos. You can get an asbestos testing kit and test the insulation yourself. However, if the test shows that the insulation does contain asbestos then you should hire a professional contractor to remove the insulation for you. They are trained and are more equipped for handling the job. If the insulation is asbestos free, you can rent an insulation vacuum to remove the insulation. Make sure to wear eye protection as well as a respiratory mask.
Step 2. Prepare the Attic – Before you have the attic re-insulated, you will want to make sure you take certain steps first. It is important to have proper attic ventilation. Each home ventilation system can vary. However, in most cases, ventilation in unfinished attics have a fresh air intake vent located in the soffits. In addition, there is one to two other exhaust vents. They are typically near the gable or at the roof’s peak. Make sure all the attic vents are clean and clear of any obstructions to promote proper air flow.
Step 3. Install New Insulation – Professional contractors use a blower machine to spread the fiberglass insulation into the attic. It is important to properly insulate the attic for proper heating and cooling efficiency. The insulation is blown in-between the rafters, and depending on your home insulation needs, there is anywhere from 6 to 12 inches of the fiberglass insulation installed in the attic.

Signs Replacing Your Attic Insulation is in Order

It is important to replace your attic’s insulation when it needs to be done. However, it can be difficult to know when to replace the insulation. There are a number of signs to watch for such as:
– Cold or Hot rooms, walls or ceilings
– Drafty rooms or uneven temperatures between rooms
– High heating or cooling utility bills
– Ice damage that may have occurred during the winter
If any of these signs have occurred in your home, consider having your insulation replaced. You can remove or prepare the attic space yourself if you wish. However, most contractors will remove and reinstall the attic insulation for you. Reinstalling attic insulation can be a hard task and hazardous if you’re not familiar with attic space and types of insulation needed.

Attic Insulation Installation & More in Bloomfield Hills, Canton, Farmington Hills, Milford, New Hudson, Northville, Novi, South Lyon, Wixom, Dexter, Plymouth, Saline, Brighton & Greater Ann Arbor, Michigan

Big Ike’s Roofing Company provides several services, including blown-in attic insulation. If you need insulation installed in your home along with any other needs other roofing needs, contact Big Ike’s Roofing Company, and schedule to have us come and assist you today.